Posted By: 71 SHAKR
8 3/4 rear end question for a Shaker 340 Cuda - 05/31/10 01:59 AM
I have a 71 Cuda 340 N96 A31(3.91 gears) package Early March SPD car with no build sheet and was wondering what rear end center section (741, 742, 489 case number) should come on the car from the factory??? The guy I baught the car from told me that the drive train was all original. It currently has a 741 with 3.91 sure grip, but looks like the bolts that hold the case have been taken off at some point. Does anyone else have a similar car, if so what case center section does your car have?? Any input would be much appreciated!
Posted By: ademon
Re: 8 3/4 rear end question for a Shaker 340 Cuda - 05/31/10 06:38 AM
well my april 2nd, 71 demon 340 was a 3.55 car acording to the owner that purchased it in 73 it had a 489 case in it with 3.23 gears but came with factory 3.55 gears in a box, no BS also. BTW do you have a p/s cooler on yours?
Posted By: DoctorDiff
Re: 8 3/4 rear end question for a Shaker 340 Cuda - 05/31/10 07:12 AM
A '71 'Cuda originally had a 489 case with 7290 yoke.
Posted By: DoctorDiff
Re: 8 3/4 rear end question for a Shaker 340 Cuda - 05/31/10 03:32 PM
742 third-members disappeared with the 1968 model year.
741 third-members disappeared with the 1972 model year.
I THINK the only A-bodies originally equipped with 489 castings are '69 big block versions.
All performance E-bodies came with 489 castings.