1970 V code K member bolt size

1970 V code K member bolt size - 05/19/10 04:20 AM

Hey gang. What is the bolt size for a 1970 440+6BBl K member? The 4 bolts that mount it to the frame rails. Thank you. Bill.

Posted By: 68HemiB

Re: 1970 V code K member bolt size - 05/19/10 04:56 PM

Bill, telling you the size and thread pitch of the threaded portion of those bolts will not help you. These are specialty bolts with a tapered shoulder that is important for proper positioning of the K member. The size on a V code car is the same as any other Mopar of that era. You need to shop for a set of good used or reproduction K MEMBER BOLTS. There is often a member or two with them here on the parts for sale pages, and failing that, on ebag or Amazon.

As a matter of fact, I am surprised that you did not yet get an offer to sell you some, based solely on your question.

Posted By: Anonymous

Re: 1970 V code K member bolt size - 05/19/10 05:11 PM

http://www.bmcuda.com/proddetail.asp?prod=2467693

Posted By: 68HemiB

Re: 1970 V code K member bolt size - 05/19/10 07:24 PM

Quote:

http://www.bmcuda.com/proddetail.asp?prod=2467693

RobX4406 probably has a set that he will sell for substantially less than $45.

Posted By: DusterKrazy

Re: 1970 V code K member bolt size - 05/19/10 09:06 PM

I've got k member bolts that can be had cheap if you need them. PM me..if you need help.

Thanks
-M

Posted By: QuickBpBp

Re: 1970 V code K member bolt size - 05/19/10 10:19 PM

Quote:

Hey gang. What is the bolt size for a 1970 440+6BBl K member? The 4 bolts that mount it to the frame rails. Thank you. Bill.

The same ones that bolt a 70 /6 k-member in or any other k-member nothing special...

Posted By: 70 roadrunner

Re: 1970 V code K member bolt size - 05/20/10 03:28 PM

Thanks for all the tips, info etc gang. My father had them in the top shelf of his tool box..Had to move the car yesterday to a new garage. Thanks again.

Bill.