Posted By: txterry2
Summit brand parts - 04/20/10 03:27 PM
Whose using one or more parts in their engine?Any complaints?Thanks,Terry
Summit brand parts
Posted By: 65rbdodge
Re: Summit brand parts - 04/20/10 04:19 PM
about 15 years ago i put one of their cams/lifters and timing chain set in a 318. it worked great.
Posted By: sharpie
Re: Summit brand parts - 04/20/10 04:22 PM
Not in my engine, per se, but I have a Summit mini-starter and like it 
Posted By: Mr.Yuck
Re: Summit brand parts - 04/20/10 04:28 PM
I've used their cams, t-chains, headers, wires and push rods. No problems with any.
Posted By: Todd
Re: Summit brand parts - 04/20/10 04:41 PM
Quote:Same here no problems so far. Save alot of $$$ going that route.
I've used their cams, t-chains, headers, wires and push rods. No problems with any.
Posted By: DaytonaTurbo
Re: Summit brand parts - 04/20/10 05:17 PM
No problems with the summit brand stuff here either. 
Posted By: therocks
Re: Summit brand parts - 04/20/10 05:41 PM
Used a lot and no problems.My kid has their push rods in the 413 now.Rocky
Posted By: RokketRide
Re: Summit brand parts - 04/20/10 06:41 PM
For the most part they are the same big name brand components for less money.
I bought the Summit adjustable prop valve because it looked the same as the wilwood one for a few bucks less. Peeled off the Summit sticker and sure enough, it is exactly the same part.
I bought the Summit adjustable prop valve because it looked the same as the wilwood one for a few bucks less. Peeled off the Summit sticker and sure enough, it is exactly the same part.
Posted By: NachoRT74
Re: Summit brand parts - 04/20/10 07:30 PM
agreed, Summit looks to be same big brands part without high Brands Royalties payments
Posted By: Commando1
Re: Summit brand parts - 04/20/10 09:34 PM
Summit harmonic damper.
Even heatin it and freezing (aerosol) the crank, it was a %^$#-er to get on. Me, or the part? I dunno...
Even heatin it and freezing (aerosol) the crank, it was a %^$#-er to get on. Me, or the part? I dunno...
Posted By: DaytonaTurbo
Re: Summit brand parts - 04/20/10 10:18 PM
Quote:
Summit harmonic damper.
Even heatin it and freezing (aerosol) the crank, it was a %^$#-er to get on. Me, or the part? I dunno...
It's been said on here that newer aftermarket dampers are made a little small so they can be honed to fit the crank...
Posted By: Commando1
Re: Summit brand parts - 04/21/10 12:31 AM
Quote:Quote:
Summit harmonic damper.
Even heatin it and freezing (aerosol) the crank, it was a %^$#-er to get on. Me, or the part? I dunno...
It's been said on here that newer aftermarket dampers are made a little small so they can be honed to fit the crank...
Would it have killed them to add that info to the paperwork that came with it? Sheesh.
Posted By: Supercuda
Re: Summit brand parts - 04/21/10 10:18 PM
I usually run Summit brand stuff, just not the timing chain, hey wear out quick.