Moparts

70 Cuda brake light switch ??

Posted By: Day2Runner

70 Cuda brake light switch ?? - 04/12/10 11:10 PM

My brake lights quit working and all I can figure out that its the switch on the pedal where can I get a new switch 440 6 727 car ??
thx moparts
Posted By: stumpy

Re: 70 Cuda brake light switch ?? - 04/12/10 11:40 PM

It's real easy to check the switch. Hot on one side and when you push the pedal it's hot on both sides. If it's working then you probably have a bad turn signal switch.
Posted By: okie

Re: 70 Cuda brake light switch ?? - 04/13/10 12:23 AM

I just got a new switch a NAPA. Roniie
Posted By: denfireguy

Re: 70 Cuda brake light switch ?? - 04/13/10 12:46 AM

Quote:

It's real easy to check the switch. Hot on one side and when you push the pedal it's hot on both sides. If it's working then you probably have a bad turn signal switch.


Most brake light problems are in the turn signal switch. Try putting your foot on the brake and rock the turn signal switch and see if they magically come back.
Craig
Posted By: dynamite

Re: 70 Cuda brake light switch ?? - 04/13/10 04:12 PM

AGREED TURN SIGNAL SWITCH !!!!!!
Posted By: Day2Runner

Re: 70 Cuda brake light switch ?? - 04/14/10 03:29 AM

turn signals work fine and with rockin the switch and foot on the brake I still have no brake light
will install new switch
Posted By: gtx6970

Re: 70 Cuda brake light switch ?? - 04/14/10 11:54 AM

use a test light on the wiring at the brake light switch, you should have power in when the pedal released and power on both sires depressed.
If no test light use a jumper wire and just cross the 2 wires together and see if you have brake lights.
brake light switches are cheap guess, - turn signal switches , not so cheap
Posted By: stumpy

Re: 70 Cuda brake light switch ?? - 04/14/10 03:19 PM

BTW just because the trun signals and flashers work doesn't mean the turn signal switch is good. The brake ligts are a seperate circuit in the switch.
Posted By: Sinitro

Re: 70 Cuda brake light switch ?? - 04/14/10 07:23 PM

EZ to check..
Jumper the 2 wires on the brake lite switch..
1. If the lites works, the switch is bad
2. If the lites don't work, check elsewhere

Just my $0.01..
© 2024 Moparts Forums