Moparts

Can anyone ID these bucket seats?

Posted By: slimert

Can anyone ID these bucket seats? - 03/14/10 05:43 PM

Have had these a while and need to sell, but not sure what they are for. I'm guessing mid 70s Cordoba, but they have the removable plastic seat backs??

Attached picture 5864468-buckets.JPG
Posted By: ademon

Re: Can anyone ID these bucket seats? - 03/14/10 05:49 PM

Not sure but F body Volare ect..
Posted By: RUNCHARGER

Re: Can anyone ID these bucket seats? - 03/14/10 06:23 PM

Something like a 76 Volare.

Sheldon
Posted By: slimert

Re: Can anyone ID these bucket seats? - 03/14/10 07:12 PM

Thanks for the replies. They measure @ 22" width, look a little wider than the e bodies but the Cuda seat's the same.

I had a 79 Aspen many moons ago (first new car, showing my age!) but it was a bench seat.

Attached picture 5864702-P1010880.JPG
Posted By: nomore65BelvJim

Re: Can anyone ID these bucket seats? - 03/14/10 07:17 PM

Measure the bolt spacing on the tracks, where they mount to the floor, width and length. That should tell what they fit.
Posted By: slimert

Re: Can anyone ID these bucket seats? - 03/14/10 08:05 PM

OK-- studs are 13 3/4" width and 13" depth.

Also has a tag on the bottom spring with #s 3844862 28135 HBB

Mike.
Posted By: 6bblgt

Re: Can anyone ID these bucket seats? - 03/14/10 08:10 PM

Here's a '77 Volare Road Runner with the same seats in WHITE - Ebay Road Runner

Attached picture 5864797-2_1267722905IMG31.jpg
Posted By: 6bblgt

Re: Can anyone ID these bucket seats? - 03/14/10 08:11 PM

another pic

Attached picture 5864799-2_1267722913IMG32.jpg
Posted By: slimert

Re: Can anyone ID these bucket seats? - 03/15/10 02:19 AM

Excellent! Thanks alot Dan.

© 2024 Moparts Forums