Posted By: Six Popper
Big Block question. - 03/03/10 11:24 PM
Okay so I have never owned a big block until about two months ago, I bought a truck that came with what I was told a 71 383 block. I was moving it around the garage today and thought I would check it out. I found the date it is a 71 year model, but I can't find the cubic inch. On small blockes it tells the CI on the opposite side of the the block as the date. This big block says 430 where a small block tells the CI. My question is where are the numbers that I can decode to tell me what I have. Thanks Chris
Posted By: DaytonaTurbo
Re: Big Block question. - 03/03/10 11:44 PM
Should be big numbers on the side of the block, sort of under where the spark plugs would go.
Posted By: Six Popper
Re: Big Block question. - 03/03/10 11:50 PM
I checked oil pan rails, and for any pad under or around where heads are for stamped numbers with no luck. I will look at the cast in numbers but I'm sure it said 430.
Posted By: Six Popper
Re: Big Block question. - 03/04/10 12:09 AM
Casting numbers are 2536430-9.
Stamped numbers on oil pan rail are 2F176117.
Posted By: Anonymous
Re: Big Block question. - 03/04/10 12:59 AM
Quote:
Quote:
Casting numbers are 2536430-9.
Stamped numbers on oil pan rail are 2F176117.
Numbers come up 440 66-72
check flat pad on driver side...topside of engine
Numbers say its a 440.
BTW, a 383 won't have that pad; if it's there, it would have to be an RB, not a B. Easiest way to differentiate the two versions of the big block w/o even looking at any numbers.
Posted By: Six Popper
Re: Big Block question. - 03/04/10 02:24 AM
Thanks for the help, it might not seem like it but I was raised up around Mopars, so I look forward to being able to help you guys out in the future.