lower torque arm transmission bracket for AAR

Needing pics of the lower torque arm trans bracket for a AAR thanks for the free add.

a what? you mean the transmission cross member?

there is nothing different on an AAR trans bracket than any other e body

not the trans cross member, the small bracket that has two bolts and bolts to the tail section to hold the lower torque shaft that comes thru the floor to hold in place the lower shift linkage i have 3 SB trans and all 3 have different brackets.

be right back

Is this what you are looking for?

no, i think he means the long rectangular shify lever bracket. the ome that has the plastic grommet in it that the stabilizes the bottom of the shifter rod

Like this?

Maybe this will help?

no, the rectangular piece under the car. kinda bent. has two studs on one end that bolt to the transmission. the other end has a hole with a grommet in it. the verticle shift lever rod gotes into it. you know the rod that goes from the piece you showed that goes thru the tunnel

it the modified support bracket in this http://www.ttiexhaust.com/PDF/Sheet3703-TSlever.pdf

Another picture.

here is a pic of the complete shaft i need the bracket that holds the lower shaft and bolts to the tail shaft of the trans ,thx

Quote:

---

Maybe this will help?

---

ya, the bracket is shown in that picture.