Moparts

68-69 Coronet Vinyl Roof Emblem Location

Posted By: P1970HeMICuDA

68-69 Coronet Vinyl Roof Emblem Location - 01/29/10 05:48 PM

Getting ready to drill 2 holes for Fratzog or Tristar emblem on side of roof.

I need measurements from vinyl top molding and drip rail molding if possible.

TIA

Attached picture 5767802-mopp_0812_33_z+vinyl_top_installment+vinyl_fit.jpg
Posted By: P1970HeMICuDA

Re: 68 -70 Coronet Vinyl Roof Emblem Location - 02/16/10 04:14 AM

bump
Posted By: MoparDreamer

Re: 68 -70 Coronet Vinyl Roof Emblem Location - 02/17/10 04:16 AM

I need to know the same thing for my 69 Super Bee.
Posted By: OLD318

Re: 68 -70 Coronet Vinyl Roof Emblem Location - 02/17/10 12:12 PM

FWIW, The roof emblem is used on 68-69 models only, not a 70.
Posted By: TiMopar

Re: 68-70 Coronet Vinyl Roof Emblem Location - 02/17/10 02:34 PM

I will try and remember to do it at the weekend for you. You do know that it is on the driver's side only?
Posted By: mopargem

Re: 68-70 Coronet Vinyl Roof Emblem Location - 02/18/10 12:55 AM

Quote:

You do know that it is on the driver's side only?



they are on each side
Posted By: rrunner

Re: 68-70 Coronet Vinyl Roof Emblem Location - 02/18/10 01:26 AM

Quote:

Quote:

You do know that it is on the driver's side only?



they are on each side

both sides for sure.
Posted By: P1970HeMICuDA

Re: 68-70 Coronet Vinyl Roof Emblem Location - 02/18/10 03:44 AM

Yes, both sides, just need a measurement for one side though, lol

Mopargem. looks like you have a Bee there? Is it handy to measure?

Thanks
Posted By: mopargem

Re: 68-70 Coronet Vinyl Roof Emblem Location - 02/18/10 04:28 AM

Looks like 3 3/4 to center

Attached picture 5813767-A12Bee074(Small).jpg
Posted By: mopargem

Re: 68-70 Coronet Vinyl Roof Emblem Location - 02/18/10 04:30 AM

1 3/4" up to center, crummy pic,its late, my hand is shaking

Attached picture 5813774-A12Bee075(Small).jpg
Posted By: TiMopar

Re: 68-70 Coronet Vinyl Roof Emblem Location - 02/18/10 12:37 PM

Uh oh! this could end up like the '71 Challenger fender R/T badges' thread! My St.Louis built 69 R/T only has one on the driver's side!
Posted By: 68CoronetRT

Re: 68-70 Coronet Vinyl Roof Emblem Location - 02/19/10 12:11 AM

A couple of pictures:


This pic is my car which was order from factory with vinyl top:
Posted By: P1970HeMICuDA

Re: 68-70 Coronet Vinyl Roof Emblem Location - 02/19/10 04:27 PM

Good pics, thanks....is it just me , but does it look like the white top has the emblems up higher?

68CoronetRT is it possible to measure yours for comparison?
© 2024 Moparts Forums