Estimated hp/torque/ET on my setup ????

Cuda 71 prostreet, 440 .30 over forged trw dome pistons, 10,8:1 CR
Stealth alu heads non ported from 440.source
Lunati Voodoo 60303 cam, Harland Sharp roller rockers, Edelbrock Performer RPM intake, Holley 750 Vac carb,Hookers 1.7/8 " 3 inch exh. 2400-2800 stall converter, 4.10 on 29" tall tires.

some ballpark numbers?

If it's tuned right low 13's but should have a good shot at high 12's.

Lacks cam for muck more???

440 hp / 460 TQ at the crank no accessories???

Quote:

---

Cuda 71 prostreet, 440 .30 over forged trw dome pistons, 10,8:1 CR
Stealth alu heads non ported from 440.source
Lunati Voodoo 60303 cam, Harland Sharp roller rockers, Edelbrock Performer RPM intake, Holley 750 Vac carb,Hookers 1.7/8 " 3 inch exh. 2400-2800 stall converter, 4.10 on 29" tall tires.

some ballpark numbers?

---

low 13's high 12's??? if it hooks and your carb is tuned you should be way down in the 12's. 12.20-12.30. My buddy has the same set-up w/ e-heads, 9:1 and a 3.54 dana and he runs 12.40-50 Your carb could be better, but it should run pretty well. Not sure about HP numbers.