4 speed A833 question

HI,

Is there someone there know the easy way to change the
mainshaft yoke bushing on extension housing ( 4 speed A833 transmision)?

Is it installed on the transmission or off ?

The extension housing is installed on the transmision

There is a puller designed for the job , but you might have trouble finding it in your country .

Do you know where in USA I can buy that puller?

not that it's much help but

https://board.moparts.org/ubbthreads/show...e=1#Post5442371

I would check with brewers performance, if they do not have it I'm sure they can point you in the right direction.
http://www.brewersperformance.com/

good luck
scott

Quote:

---

Do you know where in USA I can buy that puller?

---

Here are the tools , price has gone up about 50% since I bought them about 7or 8 years ago .

puller http://millerspecialtools.spx.com/Detail.aspx?id=255

installer http://millerspecialtools.spx.com/Detail.aspx?id=250