Moparts

LA to MAGNUM swap - tranny question

Posted By: mopartial

LA to MAGNUM swap - tranny question - 08/18/09 02:00 AM

Im considering getting a mid 90's Mag for my 75 Scamp. I have a mid 70's 727 in storage. Should I expect to use this or would entire Magnum drivetrain (engine + tranny) swap in?

Thanks.
Posted By: mopartial

Re: LA to MAGNUM swap - tranny question - 08/18/09 10:06 AM

BTT

Por favor...This should be easy for you guys...
Posted By: patrick

Re: LA to MAGNUM swap - tranny question - 08/18/09 10:35 AM

it'll bolt up, work fine.

the OD tranny won't fit an A body with extensive floorpan/crossmember mods.
Posted By: 727jim

Re: LA to MAGNUM swap - tranny question - 08/18/09 02:12 PM

u will need to notch the r/s of the 727 case to clearence the crank sensor.
Posted By: Dos Snails

Re: LA to MAGNUM swap - tranny question - 08/18/09 04:00 PM

Quote:

u will need to notch the r/s of the 727 case to clarence the crank sensor.


Only if you plan on using the stock Magnum efi electronics. If using a carb then no need for the sensor...
Posted By: StandOnIt

Re: LA to MAGNUM swap - tranny question - 08/18/09 06:55 PM

I used my stock 904 behind a 98 5.9 with a B&M flexplate. I put a carb so no notching the bellhousing for anything. Also, use the small starter. Oh yeah, I have a volare so its just about the same as an A body underthere.
Posted By: Jambbii

Re: LA to MAGNUM swap - tranny question - 08/18/09 11:21 PM

The converter also needs to be rebalanced for a magnum motor also. I have used the MP kit.
© 2024 Moparts Forums