Posted By: Kiddart
washer jar fasteners - 03/11/24 09:05 PM
I am putting my windshield washer squirters and the washer Jar back in my 72 demon. does anyone know the size of the fasteners used to hold the washer jar in place. year one wants 10 bucks for 2 wood screws. My plan would be to get Stainless steel wood screws of the same size but i can't find anything size info on them.
thank you in advance.
Posted By: floyd
Re: washer jar fasteners - 03/11/24 09:53 PM
I’m not too familiar with A-body but these are correct for E/B-body. Only negative is the $30 minimum order from AMK.
https://www.amkproducts.com/bulk-fasteners-products/?Product_ID=13734
Posted By: topside
Re: washer jar fasteners - 03/11/24 11:54 PM
The DMT ones.
#8 with captive washers for the plastic jar.
Posted By: gtx6970
Re: washer jar fasteners - 03/12/24 12:32 AM
Same screw used inside the console to mount it.
Fuel filler to trunk floor seals
If you want close enough.
Hit homedepot and get some #10 x 5/8" ( Or a 3.4" length ) screws and small washers
Posted By: Kiddart
Re: washer jar fasteners - 03/12/24 02:12 AM
Thank you. I will go to DMT tomorrow and pick them up
Thank you again