Moparts

TTI headers on small block

Posted By: jst19600

TTI headers on small block - 01/16/24 09:52 PM

TTI headers for small block 67-76 A body.Do the header collectors exit angled in towards the drive shaft or do they run parrallel with the frame?The pictures ive seen look like the are angled.
Posted By: dvw

Re: TTI headers on small block - 01/17/24 02:23 AM

Though this s n E body I believe they are the same prt number from TTI.
Doug

Attached picture 20170215_185422.jpg
Posted By: TJP

Re: TTI headers on small block - 01/17/24 02:31 AM

Originally Posted by dvw
Though this s n E body I believe they are the same prt number from TTI.
Doug

ROOM to get the starter out? THAT's JUST WRONG!!! 🀣🎯
Posted By: 6PAX

Re: TTI headers on small block - 01/17/24 02:31 AM

I have both small and big block TTI A-body headers and they both angle inward.
Posted By: Locomotion

Re: TTI headers on small block - 01/17/24 12:14 PM

Originally Posted by dvw
Though this s n E body I believe they are the same prt number from TTI.
Doug


If I remember correctly, E and A-body headers are the same on the passenger side. Driver's side A-body has a detached #7 tube that goes around the torsion bar. E are the same as F-body. Mini-starter removal isn't bad with any, just may take some steering movement while wiggling it in & out.
Posted By: dvw

Re: TTI headers on small block - 01/17/24 01:24 PM

Originally Posted by TJP
Originally Posted by dvw
Though this s n E body I believe they are the same prt number from TTI.
Doug

ROOM to get the starter out? THAT's JUST WRONG!!! 🀣🎯


These were the easiest headers i ever installed. Didn't even use header bolts. Standard bolts fit. TT shows the same part for A body and E body.
https://www.ttiexhaust.com/TTi340.htm
Doug
Posted By: JohnRR

Re: TTI headers on small block - 01/17/24 02:32 PM

Originally Posted by TJP
Originally Posted by dvw
Though this s n E body I believe they are the same prt number from TTI.
Doug

ROOM to get the starter out? THAT's JUST WRONG!!! 🀣🎯


And you don't have to take the steering linkage apart to install/remove he headers ... what the heck is wrong with these people ???
Posted By: Locomotion

Re: TTI headers on small block - 01/17/24 05:04 PM

Originally Posted by dvw
Originally Posted by TJP
Originally Posted by dvw
Though this s n E body I believe they are the same prt number from TTI.
Doug

ROOM to get the starter out? THAT's JUST WRONG!!! 🀣🎯


These were the easiest headers i ever installed. Didn't even use header bolts. Standard bolts fit. TT shows the same part for A body and E body.
https://www.ttiexhaust.com/TTi340.htm
Doug



TTI Part #'s & applications.

It's basically A-body and then all the rest.
Posted By: dvw

Re: TTI headers on small block> - 01/17/24 11:42 PM

Originally Posted by Locomotion
Originally Posted by dvw
Originally Posted by TJP
Originally Posted by dvw
Though this s n E body I believe they are the same prt number from TTI.
Doug

ROOM to get the starter out? THAT's JUST WRONG!!! 🀣🎯


These were the easiest headers i ever installed. Didn't even use header bolts. Standard bolts fit. TT shows the same part for A body and E body.
https://www.ttiexhaust.com/TTi340.htm
Doug



TTI Part #'s & applications.

It's basically A-body and then all the rest.


The link I posted shows the same prt number.
Doug
Posted By: TJP

Re: TTI headers on small block - 01/18/24 03:45 AM

Originally Posted by JohnRR
Originally Posted by TJP
Originally Posted by dvw
Though this s n E body I believe they are the same prt number from TTI.
Doug

ROOM to get the starter out? THAT's JUST WRONG!!! 🀣🎯


And you don't have to take the steering linkage apart to install/remove he headers ... what the heck is wrong with these people ???


🎯 iagree
no reason to swear, drink beer, smoke cigarettes - - - WTH are they thinking? has to be the democrats and liberals stirthepot🀣
Posted By: 69Cuda340S

Re: TTI headers on small block - 01/18/24 04:18 AM

TTI headers and TTI 2 1/2 exhaust on my '69 A Body. Mufflers are Dynomax Ultra Flo but pipes are TTI.

Attached picture On Lift With Old Floor.jpg
Posted By: moparx

Re: TTI headers on small block - 01/18/24 07:08 PM

Originally Posted by TJP
no reason to swear, drink beer, smoke cigarettes - - - WTH are they thinking? has to be the democrats and liberals stirthepot🀣




i just like to drink and swear, in no particular order, for the fun of it ! laugh2 panic rant realcrazy punkrocka
unfortunately, i haven't smoked in years, unless one counts the times smoke comes out my ears due to "reasons" beyond my control........... biggrin
beer
Posted By: TJP

Re: TTI headers on small block - 01/19/24 03:17 AM

Originally Posted by moparx
Originally Posted by TJP
no reason to swear, drink beer, smoke cigarettes - - - WTH are they thinking? has to be the democrats and liberals stirthepot🀣




i just like to drink and swear, in no particular order, for the fun of it ! laugh2 panic rant realcrazy punkrocka
unfortunately, i haven't smoked in years, unless one counts the times smoke comes out my ears due to "reasons" beyond my control........... biggrin
beer


I'm 6-1/2 years clean on the alcohol and tobacco, other types of smoke can emit from various body cavities for various reasons πŸ™„πŸ€£πŸ’¨
Posted By: 360view

Re: TTI headers on small block - 01/19/24 09:42 AM

If you eat a high fiber diet,
yeast in your gut will ferment 2 to four ounces of ethanol
that goes directly into your blood a little at a time over 24 hours.

By going directly into your blood this alcohol does not go through the stomach where it could be chemically changed to the addictive drug acetaldehyde.

Nature gave you your own beer making equipment that makes ethanol that is not subject to taxes.

Mother Nature - the best Moonshiner....
Posted By: moparx

Re: TTI headers on small block - 01/19/24 06:32 PM

Originally Posted by TJP
I'm 6-1/2 years clean on the alcohol and tobacco




congratulations ! up bow
keep up the good work !
i haven't had a smoke since the 1985/86ish time period, although i must keep up the "family tradition" of beer drinkers with an occasional one or three........ biggrin
beer
Posted By: TJP

Re: TTI headers on small block - 01/20/24 03:09 AM

Originally Posted by moparx
Originally Posted by TJP
I'm 6-1/2 years clean on the alcohol and tobacco




congratulations ! up bow
keep up the good work !
i haven't had a smoke since the 1985/86ish time period, although i must keep up the "family tradition" of beer drinkers with an occasional one or three........ biggrin
beer


Congrats to you as well wink My issue is if I have ONE of either, it will eventually lead to another, then two, then three until I wind up back where I was. I've learned that the only way I can control both is not to have either frown I learned this after quitting both several times. 4+ weeks in an induced coma followed by 4 + weeks of rehab was the perfect time to walk away from both. up
Posted By: moparx

Re: TTI headers on small block - 01/20/24 07:29 PM

Originally Posted by TJP
Originally Posted by moparx
Originally Posted by TJP
I'm 6-1/2 years clean on the alcohol and tobacco




congratulations ! up bow
keep up the good work !
i haven't had a smoke since the 1985/86ish time period, although i must keep up the "family tradition" of beer drinkers with an occasional one or three........ biggrin
beer


Congrats to you as well wink My issue is if I have ONE of either, it will eventually lead to another, then two, then three until I wind up back where I was. I've learned that the only way I can control both is not to have either frown I learned this after quitting both several times. 4+ weeks in an induced coma followed by 4 + weeks of rehab was the perfect time to walk away from both. up



eek
glad you are still here after that mess !
beer
Posted By: jst19600

Re: TTI headers on small block - 01/25/24 05:06 PM

What about Dougs D453 headers for small block,does anyone know if they angle in?
Posted By: 76Beeper

Re: TTI headers on small block - 01/25/24 05:13 PM

No, they do not.
The collector runs parallel with the torsion bar.

Attached picture Oct 29th (6).jpg
Posted By: B3422W5

Re: TTI headers on small block - 01/27/24 12:38 PM

Originally Posted by jst19600
What about Dougs D453 headers for small block,does anyone know if they angle in?


Having had both TTI’s and Dougs on A body small blocks, I much prefer the fit of the Dougs, and they make good power.
© 2024 Moparts Forums