2011 chrysler 300C

the 2 bolts/screws holding the gas pedal to firewall backed out. the left side bolt/screw was still there but loose, the right side bolt/screw is gone. i tried testing the left side bolt/screw in the right side hole, but it's too big. anyone know what size these bolts are? it has a T30 torx head & 3/4" long unknown diameter of the coarse threads, for the left side bolt, unknown for the right side. any idea where i might obtain these screws/bolts? anyone have a clue if they cross reference to another vehicle with a 5.7 hemi? never had gas pedal screws/bolts fall out like this. any help is greatly appreciated thanks dave ss/ea #1355

would imagine it would be the same as a similar vintage charger or challenger....

you're right just what i was thinking, been trying to find a junked vehicle. chrysler doesn't list bolts or screws by part #'s so it's a crap shoot. and i don't feel like having to buy a complete drive by wire gas pedal assembly just for 1 screw. thanks for responding dave ss/ea #1355