TA / AAR Upper Fender Studs

Posted By: VCODE

TA / AAR Upper Fender Studs - 06/12/23 03:46 PM

Does anyone have there TA or AAR apart? I need the original upper fender stud measurement with a picture please.
Bob
robertconca426@gmail.com

Posted By: VCODE

Originally Posted by VCODE

Does anyone have there TA or AAR apart? I need the original upper fender stud measurement with a picture please.
Bob
robertconca426@gmail.com

Bump, Anyone

Posted By: PhillyRag

Originally Posted by VCODE

Does anyone have there TA or AAR apart? I need the original upper fender stud measurement with a picture please.
Bob
robertconca426@gmail.com

Bump, Anyone

You need to know distance of studs above nuts I assume.
Only a few spots, near hinges as I recall.
Sorry; don't have that dimension.

Posted By: VCODE

Originally Posted by PhillyRag

Originally Posted by VCODE

Does anyone have there TA or AAR apart? I need the original upper fender stud measurement with a picture please.
Bob
robertconca426@gmail.com

Bump, Anyone

You need to know distance of studs above nuts I assume.
Only a few spots, near hinges as I recall.
Sorry; don't have that dimension.

The stud. Just the stud length from end to end.
I know the the distance above nut when assembled

Posted By: 71GTX471

probably same as 71/2 b-body.

Posted By: skdmark

The e-body fastener guide from MMC says the fender studs have 5/16-18 threads and they are 1.32 inches long by 0.38 on one end and 0.75 on other

Posted By: moparx

Posted By: VCODE

Originally Posted by skdmark

The e-body fastener guide from MMC says the fender studs have 5/16-18 threads and they are 1.32 inches long by 0.38 on one end and 0.75 on other

I saw that, thank you. I just was trying to confirm with a document one.