Cragar Wheel Open-End Lug Nuts Help

Any recommendations on open-end lug nut part #'s for my rear wheels?

The rear wheels are unilug Cragar SS wheels (part # 61017). The lug studs are 1/2" and 3" in length.

(I already purchased the unilug washers)

Thanks!

There's a seller on Ebay - Lugnut King - who I've bought open & closed lug nuts from a few times, I'd recommend them.

I've been using McGards exclusively forever. Quality, made in the USA. As long as you don't beat them up with a wrench, they look great for many years, Won't peel and rust in 6 months like the offshore stuff

Don't remember the shank length needed for those, but they are available in .49, .75, and 1.365 shank lengths. We've bought them long in the past and trimmed them to fit on some odd deals.

Here you go, McGard 61005, open end for cragar s/s uni lug or early direct bolt.

We use to have to cut the ends off of the regular ones for use on the Crager SS wheels due to nobody making them, open end lug nuts for those wheels, at that time

Mcgard tough nuts look good for years. I have some that are over 30 years old. Still look great.

Doug