12” ANCO Wipers

These NOS wiper arms came with my A100 when I purchased it, although they have the correct arm angle to them, they are 12” blades as opposed to the factory 18” blades. They have been sitting in cold storage for the last 20 years and I have not ever seen another set, therefore I do not know what they are correct for. Anyone have any ideas?

.

Couldn't read the part # but you might try calling Anco or look here LINKY

Go to this NAPA link for 12" "Classic" wiper blade assemblies and go to the fitment list, it might help? There's 55 applications or fitments for Dodge alone

https://www.napaonline.com/en/p/WIP61233

Mike

Thanks guys, I appreciate the help.

Yeah! Thanks guys. I've been looking for original style blades.

Good luck finding refills, I have those blades on my 51. I can't find refills for it though.

NAPA's site list them as refill - YES but I couldn't find a listing for the refills. Call your local NAPA and ask if they have the 12" refills?

https://www.napaonline.com/en/p/WIP61233

dapters Required Yes
Brand NAPA
Blade Type Beam
Adapters Included Yes
Contents (1) Wiper Blade
Blade Length 12 in
Refillable Yes
Manufacturer Part Number 61233
Sub Brand Classic
VMRS Code 002035015

I still have a new set in the package pictured if you need them.

The A100 van takes the 18" blade assembly?

NAPA's site list them as refill - YES but I couldn't find a listing for the refills. Call your local NAPA and ask if they have the 12" refills?

https://www.napaonline.com/en/p/WIP61233
51 what?
have you checked with Bernbaum or Roberts?. Might also lokk at the older ford a chevy parts houses

15 1/2 sorry.

I have the ANCO 12" replacement blade assembly, the original blades used some real funky attachment, which I now find to be easier to get refills for, lol.

that attachment method is identical to the wipers / arms on my 38 Ford

The 12” Anco wiper arms are used on the Sweptline trucks….I know my 64 D100 has the same arms with 12” Anco blades.

Yeah, surprising how much aftermarket Ford support for that era car bleeds over to Mopars. My interior handles have Ford escutcheon springs and pins, lol. About the third of the price the NOS Mopar guys want.

i have taken the refills out of old blades and went to the parts store or wal-mart, and compared the rubber parts [blades] to modern vehicle availability.
pretty lucky with finds, and most of the time, i can buy one refill, cut it in two, and fit it into the old refill metal retainer.
your mileage will vary.