8 3/4" rear with sealed bearings, original axle seals nee

8 3/4" rear with sealed bearings, original axle seals nee - 09/19/22 06:03 PM

Competition Engineering sealed axles bearings # 8008 for Mopar 8 3/4 rear, are factory axles seals still required. New bearings have o-ring seal around perimeter..

Posted By: moparx

Re: 8 3/4" rear with sealed bearings, original axle seals nee - 09/19/22 06:18 PM

if it were me, i would put them in if possible.
it couldn't hurt.

Posted By: Cab_Burge

Re: 8 3/4" rear with sealed bearings, original axle seals nee - 09/19/22 07:55 PM

Originally Posted by moparx

if it were me, i would put them in if possible.
it couldn't hurt.

Make sure and get the correct inner seal, not for a Dana 60 axle, 8 3/4 30 splines only