coker tire Mopar Standard Cap

should just snap right on my stock 82 cordoba rims

i would say yes.
the cap should measure roughly 9" [or so], and your wheel bumps should measure roughly the same.

Stock Mopar steel wheels, I say yes it will

They are the same as the Police caps as Moparx wrote, 9". This pic came from Feebay

Hi , are we dealing with 10" nubs or 9" nubs Rims . Big difference ! Ronnie

Yeah, like one inch difference

Mopar '68 & newer dog dish caps are 9" OD diameter (8-5/8" ID).

The '67 & earlier used a 10-1/4" OD cap, & they were 9-3/4" ID.

i remember the older caps were roughly 10" in diameter, but i wasn't sure when the change to the 9" caps came.
thanks for clarifying that for me.

[Mopar '68 & newer dog dish caps are 9" OD diameter (8-5/8" ID).

The '67 & earlier used a 10-1/4" OD cap, & they were 9-3/4" ID. [/quote]

---------------------------------------------------------------------------------------------------

Slightly incorrect , A bodies were 9 inch caps before 68.
That I know of A bodies were never 10 inch caps....

Frank