Need a 90 deg adapter lug for starter

I'm trying to route the battery cable to a Gen3 starter. I have very little room, TTI shortie headers hug the block.
Battery is coming in from back, along the the block.
Starter terminal is 90 deg off from where I'd like it.
I tried to bend the cable terminal, not enough room and cable isn't flexible.
Any ideas where I could find something like in the pic? I'd bolt this to the starter, then battery cable would lay flat.

Not my car, but pic gives a good idea of the situation, but shortie headers blocking side entry.



Thx

Would something like this on the end of the cable work?

https://brillman.com/product/2-gauge-flag-type-battery-cable-lug-38-hole/

OR this Mini starter cable relocation kit
may be other versions as well

That mini started kit might work,
More than I'd like to pay, and would have to cut it in half,
But it's the only thing remotely close at this point.

Thx

Amazon has some.... price isn't all that cheap..

https://www.amazon.com/s?k=90+degree+starter+lug&crid=1382CCHBT84JI&sprefix=%2Caps%2C387&ref=nb_sb_ss_recent_1_0_recent

How about this? https://www.amazon.com/ODYSSEY-Odyssey-L-Terminal-Adapter/dp/B004QCEQO4/ref=sr_1_2? If that won't work try Grainger. They have all kinds of stuff.

One of these might work. Click link


https://www.google.com/search?q=90+...xLjOYAQCgAQHIAQjAAQE&sclient=gws-wiz

edit: dead picture

Mancini sells a 90degree adapter for a mini starter 26.99.