727 transmission lines

I have 72 duster with a 383 and 727 in it. Need some new transmission lines for it.Will ones from a 67-69 dart cuda that came with a 383 from factory work?since some had 383s in them from factory from 67-69.

I would imagine all A bodies would use the same cooler lines as long as it was equipped with a 727.
Regardless of engine.

Ok kinda what l though they work.lookin for advice by others see what they say before gettin

This ^^^^ ...a 727 is a 727 , big or smallblock, when it comes to cooler lines and linkage ... excluding hemi cars with extra external trans cooler .

Just get lines for your car , 72 duster with a 727 ... 340's had them .

73-76 A-bodies take a different part number transmission lines. It's because of the Spool Mounts supports on the K-member.

So if you are using a DC Big Block K-member that uses a spool mount arrangement, I'd think you'd want a 73-76 A-body transmission line.

I'm using the 67-72 k-member biscuit type mounts with Schumacher engine mount conversion kit.

The 67-72 stuff should be good then.

Alright cool thanks for the info