Cuda suspension parts

I have a 71 cuda that I'm restoring and would like all the correct parts pieces and bushings for the front and rear suspension. Who in the hobby might have this stuff? For instance factory ball joint boots or replicas of originals.

Thanks!

Local parts store, NAPA, Rock Auto, etc.

I have an extensive inventory of top quality items for both front and rear suspension.


You can review the items on my website at: www.billrolikenterprises.com Your needs can be found primarily in Group 2 and Group 17 of the site index.


bremotorsports@verizon.net


201-394-5533 Cell/Text


Bill Rolik

Just noticed your mention of factory ball joint boots.

I don't believe any new tie rods are manufactured to take the original snap on boots that have a metal ring molded into them.

Most all brands new lower ball joint boots are snap on. But I think the profile of the originals are different. Not as large and rounds as current

Seems like new brands upper ball joints are either square profile metal snap with molded over rubber or exposed cad swaged over end metal snap. Not sure which is similar to production line parts.

Otherwise NOS will get you very close.


If you are looking at this level of detail, I assume the rest of the more noticeable parts of the car will be to an even higher level of detail.