Moparts

A833 stamping ID numbers

Posted By: hemienvy

A833 stamping ID numbers - 05/03/22 03:27 AM

OA186100...............partial VIN, any way to tell what car this came out of ?

PP833 3084 231..................These are the other numbers, I know what those are.
Posted By: 6bblgt

Re: A833 stamping ID numbers - 05/03/22 04:11 AM

18 or 23-spline?

it is from a 1970 Lynch Rd. Plymouth B-body that was "scheduled" 12/19/69
if the stamping is accurate "3084" is 1/6/70 - work - the car was built a little LATE
Posted By: hemienvy

Re: A833 stamping ID numbers - 05/03/22 12:45 PM

Thanks 6BBL, it's a 23-spl.
Posted By: JohnRR

Re: A833 stamping ID numbers - 05/05/22 03:31 PM

Originally Posted by hemienvy
Thanks 6BBL, it's a 23-spl.


Does it have a big block size bearing retainer or small block ?
Posted By: 6bblgt

Re: A833 stamping ID numbers - 05/05/22 04:45 PM

there are NOT any 318 4-speed or 340 4-speed B-bodies for 1970 - from a 383HP car
Posted By: hemienvy

Re: A833 stamping ID numbers - 05/05/22 07:46 PM

It is indeed big block.
Posted By: Cab_Burge

Re: A833 stamping ID numbers - 05/05/22 07:52 PM

1970 was the first year that Mopar had N.P. change the tail shaft housing to dual shifter mounts to fit both the B and E bodies: up: scope:
Posted By: JohnRR

Re: A833 stamping ID numbers - 05/06/22 12:35 PM

Originally Posted by 6bblgt
there are NOT any 318 4-speed or 340 4-speed B-bodies for 1970 - from a 383HP car


Thanks for the info , wasn't sure if it was still a thing for 70. What about 383-2 bbl , did they carry over to 1970?

With this in mind it's from a 70 Roadrunner, or lower models that were available with a 383 .
© 2024 Moparts Forums