Moparts
Need a picture of an E-body Firewall
Posted By:
Dragula
Need a picture of an E-body Firewall -
01/08/22
11:25 PM
So my master cylinder has a big heavy plate behind it, can I get rid of it?....What's behind it?
Posted By:
dvw
Re: Need a picture of an E-body Firewall -
01/09/22
12:09 AM
I attached the under dash pedal box to the roll cage dash bar. That allowed me to remove the plate without excessive flex.
Doug
Posted By:
EW1BH27
Re: Need a picture of an E-body Firewall -
01/09/22
02:29 PM
This is what I have on my computer, don't know if it's what you're looking for though.
Posted By:
cudaman1969
Re: Need a picture of an E-body Firewall -
01/09/22
03:05 PM
If you don’t mind the brakes flexing in and out remove the ‘big heavy plate’. Let me know when you’re out driving around
Posted By:
moparx
Re: Need a picture of an E-body Firewall -
01/09/22
05:59 PM
that plate is there to prevent the firewall from flexing. it shouldn't be removed in my opinion.
Posted By:
Moparite
Re: Need a picture of an E-body Firewall -
01/09/22
06:15 PM
X2! Removing it the firewall will start to crack around the bolt holes.
Posted By:
Dragula
Re: Need a picture of an E-body Firewall -
01/10/22
01:39 AM
So, I am just looking for weight savings and one less thing in the engine bay...
Posted By:
BDW
Re: Need a picture of an E-body Firewall -
01/10/22
01:51 AM
Remove the hood hinge springs and use a prop rod
Posted By:
MoparMike1974
Re: Need a picture of an E-body Firewall -
01/11/22
06:10 AM
Remove the engine and give it to me. That would cut the weight way down. I agree with the above, dont remove the master cylinder plate. Its not that heavy and it serves a specific purpose.
Posted By:
jlatessa
Re: Need a picture of an E-body Firewall -
01/11/22
03:48 PM
Easy enough to fab from AL. if you need to remove 8 oz.....
Joe
Posted By:
6PKRTSE
Re: Need a picture of an E-body Firewall -
01/18/22
05:43 PM
I removed my factory steel piece and fabricated my own out of aluminum to relocate my master cylinder.
© 2024
Moparts Forums