Moparts

Vacuum fitting for intake manifold

Posted By: orange

Vacuum fitting for intake manifold - 01/03/22 09:45 PM

What vacuum fitting did Mopar use on a 1969 Charger with manual brakes and air conditioning? I need vacuum for the headlight doors and the air conditioning. Thanks
Posted By: SomeCarGuy

Re: Vacuum fitting for intake manifold - 01/04/22 01:37 PM

I’m in need of one for a 69 GTX with ac. I’ve found some listed for chargers specifically. 521 restorations has the one for my car. I think they have the charger ones as well. Best I can tell you just cap off the power brakes port. Need to look that up myself as I have manual brakes also.
Posted By: SomeCarGuy

Re: Vacuum fitting for intake manifold - 01/04/22 01:43 PM

https://521restorations.com/Power-Brake-Vacuum-fitting-68-9-Charger-with-AC-1-8-and-1-4-aux-ports/

Try this.
Posted By: 6PakBee

Re: Vacuum fitting for intake manifold - 01/04/22 02:10 PM

I'm thinking this is what you want.

Single Connection Vacuum Fitting
Posted By: SomeCarGuy

Re: Vacuum fitting for intake manifold - 01/04/22 03:51 PM

That’s exactly what I need, thanks!

For his car he would need a port for both ac and the headlights. Did they have a tee or a dual port fitting like that without the big one for the booster?
Posted By: 6PakBee

Re: Vacuum fitting for intake manifold - 01/04/22 08:07 PM

I can't say that I've seen every vacuum fitting Mopar ever made but I've never seen one that had multiple ports for accessories without a PB port. shruggy
Posted By: moparmarks

Re: Vacuum fitting for intake manifold - 01/04/22 08:56 PM

I have a few like that and have also had manual brake cars with some vacuum something that had a small nipple fitting like these.
Posted By: 6PakBee

Re: Vacuum fitting for intake manifold - 01/05/22 12:11 AM

Originally Posted by moparmarks
I have a few like that and have also had manual brake cars with some vacuum something that had a small nipple fitting like these.


If you have a two nipple fitting without a PB port I'd appreciate a picture. As I said, I've never seen one.
Posted By: TJP

Re: Vacuum fitting for intake manifold - 01/05/22 02:10 AM

Originally Posted by SomeCarGuy
That’s exactly what I need, thanks!

For his car he would need a port for both ac and the headlights. Did they have a tee or a dual port fitting like that without the big one for the booster?


Those almost look fabricated to me shruggy definitely pricey beer
© 2024 Moparts Forums