Posted By: B5TA
340 SixPak Intake Manifold - 12/14/21 04:06 PM
Does anyone by chance have a picture of the bottom side of the intake manifold that has the steel heat shield removed ? Thanks, Kevin
340 SixPak Intake Manifold
Posted By: 70sixpkrt
Re: 340 SixPak Intake Manifold - 12/14/21 04:16 PM
.
Posted By: rarefish
Re: 340 SixPak Intake Manifold - 12/14/21 04:17 PM
Here is pic of the one I have...
Posted By: B5TA
Re: 340 SixPak Intake Manifold - 12/14/21 04:36 PM
Thanks Guys ! So what is the best way to block off the heat riser passages ? Thanks ,Kevin
Posted By: greendart408
Re: 340 SixPak Intake Manifold - 12/14/21 04:40 PM
Fel pro 1213S, been running them on my 69, 340 dart for 20k miles. Work great
Posted By: 340SIX
Re: 340 SixPak Intake Manifold - 12/14/21 11:28 PM
Originally Posted by greendart408
Fel pro 1213S, been running them on my 69, 340 dart for 20k miles. Work great
Same here. Also what we used to port the intake and heads. Both the Edelbrock Factory 1970 intakes and the aftermarket Edlebrock bottoms looked the same as well as the Mopar Preformace one I have.
Dont worry I sold at almost a give away price the numbers 1970 one and used a new Reproduction Edebrock and Mopar Performance to port and then polish for a shiny look
