Neutral Safety Switch/Reverse Lamp Harness?

Can anyone ID this auto transmission neutral safety switch / reverse lamp switch harness?
All three wires go to a single male connector.

That could be from a lot of different cars. my only guess is that it is from a '68 and newer car - because my '67 Barracuda did not have the 3 pin connector for the trans, it only had the 1 pin for the neutral safety switch. (The other 2 pins are for the backup lights - which on my '67 were triggered by a switch on the base of the steering column OR on the shifter if a 4spd)

Its no doubt a 69 and newer one.
What is a little different is that the neutral safety wire that would go to the G terminal on the starter relay does not have a separate terminal.

Pretty sure 71 ( or 73 ) and lates A Body. They use to get an extension harness to reach the bulkhead and Starter relay. E bodies and 71-74 B bodies got them with the plug straight to the bulkhead and I think pre 70 cars get the NSS harness with free terminals to be inserted into the wiper motor plug.

dunno if maybe some C body.

But allways pre 75 because by 75, the color setup of the harness changed to violet, black and brown/yellow wires.