A833 Tail Shaft Vent Deflector

Posted By: mopar4ya

A833 Tail Shaft Vent Deflector - 05/25/21 11:19 PM

Ok, been to long since I took this apart. My question is if the vent deflector should lay down in the housing, or does it sit up on the rear of the bearing flange? If this looks wrong, would any one have a picture of on installed correctly. Thanks!

Attached picture 1B8606A0-419B-4F02-A852-F33DEE0E23B0.jpeg

Attached picture 1B8606A0-419B-4F02-A852-F33DEE0E23B0.jpeg

Attached picture 7511F6B2-F027-4753-8082-A4B7BEFAA375.jpeg

Attached picture D60A13C2-4FBE-4817-BB9E-68A1F5857A49.jpeg

Posted By: Stanton

Re: A833 Tail Shaft Vent Deflector - 05/26/21 01:00 AM

It blocks stuff from blowing out the vent - so it goes up top. Just kinda snaps in place. Looks right.