Posted By: B5TA
TA - AAR Guys, Exhaust Recommendation - 04/13/21 03:26 PM
What Brand / Supplier would you suggest for a " Complete System " , I need everything except the Tips . Thanks, Kevin
TA - AAR Guys, Exhaust Recommendation
Posted By: Mastershake340
Re: TA - AAR Guys, Exhaust Recommendation - 04/13/21 03:57 PM
No doubt the best mufflers and head pipes out there are the ones ECS recently introduced to the market.
https://ecs-automotive-concepts.mys...ar-t-a-muffler-chrysler-licensed-product
They sell headpipes too.
Pricy, but they offer discounts once in a while and if you can wait until the shows this summer you can likely save on shipping too.
A few years back when I was restoring my T/A I used restored tips and NOS mufflers, and bought my headpipes from Dales Cuda Shop.
I had bought a pair of their mufflers too, which as previously mentioned I didn’t end up using, they are nice looking with Chrysler part number, pentstar and date code. Still here gathering dust if someone ever wants to buy them.
https://ecs-automotive-concepts.mys...
They sell headpipes too.
Pricy, but they offer discounts once in a while and if you can wait until the shows this summer you can likely save on shipping too.
A few years back when I was restoring my T/A I used restored tips and NOS mufflers, and bought my headpipes from Dales Cuda Shop.
I had bought a pair of their mufflers too, which as previously mentioned I didn’t end up using, they are nice looking with Chrysler part number, pentstar and date code. Still here gathering dust if someone ever wants to buy them.
Posted By: DAYCLONA
Re: TA - AAR Guys, Exhaust Recommendation - 04/13/21 04:17 PM
Originally Posted by B5TA
What Brand / Supplier would you suggest for a " Complete System " , I need everything except the Tips . Thanks, Kevin
Only one choice IMHO...ECS
Posted By: Grizzly
Re: TA - AAR Guys, Exhaust Recommendation - 04/14/21 03:35 AM
Does anyone have a photo or know what a Trans Am muffler looks like cut open? 
How are they baffled? Perforated?
Side question: are the tips available without restrictors?
How are they baffled? Perforated?Side question: are the tips available without restrictors?
Posted By: B5TA
Re: TA - AAR Guys, Exhaust Recommendation - 04/14/21 01:28 PM
i've never seen one (muffler ) cut open . yes you can get the Tips with NO baffles , also fake removable baffles for car shows from ACCURATE EXHAUST.
Posted By: Sunroofcuda
Re: TA - AAR Guys, Exhaust Recommendation - 04/15/21 02:49 AM
If these reproductions are built just like the OE mufflers, then they each have a flow rate of 175 sCFM. I have a pair of NOS AAR mufflers & in 2001, I brought one of them in to work when I worked for Dynomax/Walker & we flow tested one. Our head engineer brought the muffler to my desk after testing it & said "this is a PIG!" The OE mufflers have a body length of 20" give or take an inch. Dynomax has this style muffler in Super Turbo, but they are 14" long bodies, & they flow around 425 sCFM - HUGE improvement vs the OE Chrysler muffler design. (BTW - Walker may have been OE on these mufflers to begin with anyway, but they were built to control noise - they are quieter than the Dynomax mufflers). Anyway, these Super Turbos are available in both 2.25" & 2.5" versions.