Posted By: Montclaire
Part number for 1971 throttle pressure lever? - 03/14/21 09:17 AM
Hello, can anyone give me the part number for the throttle pressure apply lever on a 1971 torqueflite behind a 440? I believe this is the offset one but I am not sure. My kickdown is coming up a little short and I’m thinking I have the wrong lever on the trans. Thanks
Posted By: Gtxxjon
Re: Part number for 1971 throttle pressure lever? - 03/16/21 08:40 AM
Length is everything, when it comes to Throttle pressure levers!
Think I got a spare one here if you have any probs.
Gtx1971John UK
Posted By: Montclaire
Re: Part number for 1971 throttle pressure lever? - 03/17/21 12:51 AM
Hello, John - thanks for the offer but these seem to be pretty common ($13 shipped on ebay). I bought a one piece kickdown rod last fall and it did fit up ok with the lever but it seems short (part number on the kd rod is correct). With the length and offset it should bring everything into alignment. If I remember, I'll post measurements before I mount it.
