Posted By: 3_RTs
Rocker Moulding Clip - 69 Coronet R/T - 11/01/20 12:59 AM
Does anyone have a photo of a correct plastic clip for holding the rocker trim onto a 69 Coronet R/T? I have looked at some of the vendors products, but their photos don't show enough detail. I would like to be sure before I buy.
Posted By: 3_RTs
Re: Rocker Moulding Clip - 69 Coronet R/T - 11/03/20 02:44 AM
This clip was supplied when I bought the rocker moldings. The little ends of the clip are what actually holds the moulding on. It doesn't look strong enough to me.
Posted By: jlatessa
Re: Rocker Moulding Clip - 69 Coronet R/T - 11/03/20 01:55 PM
Looks very similar to the clips on our 70 Charger.
They do look flimsy, but after 5 years, no problems.
Joe
Posted By: 69bfan
Re: Rocker Moulding Clip - 69 Coronet R/T - 11/03/20 02:21 PM
The small nylon tabs are actually to protect the paint of the rocker as the trim will actually sit on top of the tabs. The heavier rounded radius of the clip is what fits into the edges of the trim to hold them in place. The Charger clip is similar but is different in both material characteristics and size.
Posted By: jlatessa
Re: Rocker Moulding Clip - 69 Coronet R/T - 11/03/20 02:55 PM
I forgot to mention about the thin tabs protecting the paint,
remembered it after the post....thanks, Joe
PS, What's with the 4 hour post time difference??