Posted By: Wagonmaster
Help!! Going crazy[ier] w/318 - 03/31/09 12:54 AM
Ok, here's the deal.
I have vehicle with a '71 318 BBD carbed engine. Granny-gear 4-speed. Through 1st and 2nd, it pulls like a freight train up to about 4K RPM. I don't like turning it tighter than that.
Go into 3rd or 4th, at around 2,500 - 2,600 it falls flat on its face.
Here's what I have done to date:
Fresh distriutor
Fresh plug wires
Fresh plugs.
The ballast tests good.
Haven't tested the coil, yet, but it has been great, it is an MSD blaster.
What's next? I need to make this rig dependable! It is my driver!
I have vehicle with a '71 318 BBD carbed engine. Granny-gear 4-speed. Through 1st and 2nd, it pulls like a freight train up to about 4K RPM. I don't like turning it tighter than that.
Go into 3rd or 4th, at around 2,500 - 2,600 it falls flat on its face.
Here's what I have done to date:
Fresh distriutor
Fresh plug wires
Fresh plugs.
The ballast tests good.
Haven't tested the coil, yet, but it has been great, it is an MSD blaster.
What's next? I need to make this rig dependable! It is my driver!