Posted By: CHRGR69
Metering Jets - 10/22/20 04:13 PM
Edelbrock 1411. May have mixed them up. I know the primary (front of carb) are larger holes than the secondary (back of carb), but man they don't look that much different from each other.
Posted By: second 70
Re: Metering Jets - 10/22/20 05:33 PM
factory jets on a 1411 is .110 main .107 secondary so only one jet size. The difference is the main jet has a .074 x .047 rod that reduces volume and leans out the main jet.
Posted By: CHRGR69
Re: Metering Jets - 10/22/20 10:29 PM
OK good. Think I eyeballed them right.