Does anyone referbish fact. A/c Boxes??

while car is aprat like to see if anything needs repaired...it's been 50 years after all
Thanks

I had a friend sent his off to a company in 2002 and was charged $1200 plus shipping. He got it back and it leaked on the floor of his high dollar restoration. I did my own. It’s a 70 charger and it was complicated. It took me 40 hours. I changed the heater core and water valve. I had the evaporator tested. Mine works fine except for one vacuum pod that has some stress on the rubber diaphragm. Several of my parts boxes had the same bad pod. I may have to take another pod and shorten the rod to use it. The second box I did was faster, it only took me 32! They are not easy to do so be prepared to pay.

Heard good things about this company: Link

Ive done a few ( none lately ) And not sure I would be interested in doing another at this time

be advised they are complicated and no fun ( IMO ) They can and usually will be expensive to have done

Classic Air in Tampa does them, no idea on cost.
Post back what you find

https://www.originalair.com/mopar-restoration-info

Copy all guys thanks for the intel. The place in Tampa is right down the road from me I'll try them. I just ourchased the car and A/C doesn't work (compressor kicks on but nothing else) I have the windshield out to do the top and if I'm ever gonna pull the dash now is the time so thinking about that angle

Hello, I rebuild and restore them here at my shop. I also have several original boxes that are good for cores and more boxes for parts. I can build you a box using one of my cores and sell it to you outright, ready to install. I have the original heater cores rebuilt (the aftermarket heater cores do NOT fit that great). I also have the evap cores pressure tested and cleaned. Let me know if you are interested. I can get one ready pretty quickly. I think you will find that Classic is multiple months behind on any shop work as they are running a very limited operation with the Covid mess going on. This is what they told me when I ordered some parts from them last month.
Thanks, Steve

You can do it yourself and save some coin with a gasket kit from DMT
https://www.detroitmuscletechnologies.com/

Thx steve...I'll keep you in mine!