Posted By: 67R/T4speeder
distributor ID please - 09/08/20 07:28 PM
No tag
Stamped, # On Iron housing is IBP 1A
# on advance 3438262
Single points
Thanks
Stamped, # On Iron housing is IBP 1A
# on advance 3438262
Single points
Thanks
distributor ID please
Posted By: mopars4ever
Re: distributor ID please - 09/08/20 07:52 PM
Posted By: John_Kunkel
Re: distributor ID please - 09/08/20 09:04 PM
The vacuum advance fits many '69-'71 383/440 emissions distributors. Measure the shaft to find which one.
383 – 3.5"
440– 4.0"
383 – 3.5"
440– 4.0"
Posted By: 67R/T4speeder
Re: distributor ID please - 09/08/20 09:13 PM
Originally Posted by John_Kunkel
The vacuum advance fits many '69-'71 383/440 emissions distributors. Measure the shaft to find which one.
383 – 3.5"
440– 4.0"
383 – 3.5"
440– 4.0"
440 Then
Thanks
Posted By: dragon slayer
Re: distributor ID please - 09/09/20 01:20 PM
Some one may have swapped that vacuum adv on it. I think it is the odd ball from mid 60s. Kind of a Chrysler duplication of a Prestolite. Notice the clips for holding cap on. They are different. Basically using a Chrysler cap/rotor on the prestolite type cast iron body. The ones I have seen have been single point.
Rebuilt one a while ago, thought it was a 24xxxxx number, but not completely sure.
Rebuilt one a while ago, thought it was a 24xxxxx number, but not completely sure.
Posted By: 62maxwgn
Re: distributor ID please - 09/09/20 01:38 PM
Originally Posted by dragon slayer
Some one may have swapped that vacuum adv on it. I think it is the odd ball from mid 60s. Kind of a Chrysler duplication of a Prestolite. Notice the clips for holding cap on. They are different. Basically using a Chrysler cap/rotor on the prestolite type cast iron body. The ones I have seen have been single point.
Rebuilt one a while ago, thought it was a 24xxxxx number, but not completely sure.
Rebuilt one a while ago, thought it was a 24xxxxx number, but not completely sure.
Also has a nylon shaft retainer that was not used on the Prestolite,and a riveted clip retainer used on the early distributors. .
Posted By: 67R/T4speeder
Re: distributor ID please - 09/10/20 02:30 PM
Interesting, that makes sense