Cuda Vert Seat Belt Bolts

Does a Cuda vert use the same seat belt bolts as a hardtop. I know there is no should harness bolts. Also the inner seat belt has only one strap, so does that a different bolt also. Or are all the bolts the same less the 2 should harness bolts
Bob

All the bolts are the same for both hardtop and convertible.As mentioned the roof belts and bolts do not exist on a convertible, but all other bolts are identical for either body style.

Dwight, Thanks for clearing it up for me.
Bob

[s][/s]

C10 retractors

C-11 rear outer belt. (Also for shoulder belts)

C-12 Front and rear center

To correct the above:

Front retractor("pull") belts, the correct bolts for securing these are stamped or cast C01 and are silver zinc in colour
The roof belts and the four rear belts all use bolts that are stamped or cast C11 and are black zinc in colour
The front two belts that are secured to the drive shaft tunnel area are always stamped or cast C12 and are gold zinc in colour

I have the two C01 silver ones that have threads all the way up with no shoulder, also used with a thin flat washer.

One washer on top of the retractor housing and in between the C01 bolt. Correct.

That's what I do
Bob