Posted By: IRON MAN
Drive Shaft - 05/23/20 12:38 PM
I have a drive shaft but I do not know if it the correct one for a 1970 Roadrunner with an automatic 727 Transmission. Any help would be great since the Roadrunner is in pieces.
Drive Shaft
Posted By: sxbblcuda
Re: Drive Shaft - 05/23/20 12:46 PM
What motor and rear?
Posted By: Clanton
Re: Drive Shaft - 05/23/20 12:58 PM
The length is around 50 1/2" oc of the joint depending on your setup.
Originally Posted by IRON MAN
I have a drive shaft but I do not know if it the correct one for a 1970 Roadrunner with an automatic 727 Transmission. Any help would be great since the Roadrunner is in pieces.
Posted By: sxbblcuda
Re: Drive Shaft - 05/23/20 01:11 PM
1970 PART # 2996195 - 3.25 DIA., 53.64 INCHES., 727 TRANS., 8 3/4 REAR, 383 / 440
Posted By: 1969ronnie
Re: Drive Shaft - 05/23/20 05:06 PM
that # 2996195 fits a C - body . he needs a # 2996161 section 16-02-1 R code {plymouth B body } 1970 7290 U joints , 440 , 727 auto , 51.50 long , 3.25 diameter , . 
Posted By: NANKET
Re: Drive Shaft - 05/24/20 12:01 AM
Yes it is 51.5 long for this Plymouth with 8.75.
66-70 Dodges and Plymouth are different length driveshafts for the same power train combo.
66-70 Dodges and Plymouth are different length driveshafts for the same power train combo.