Source for custom length pushrods

Anyone have a source for reasonably priced chromoly pushrods besides Manton and Smith Bro’s? I think I may be paying for a lot of California fees in there prices $12-15 is what Smith quoted. I bet Manton is more than that. I need some for a hyd roller 440 with Harlan sharp made rockers. Ball and cup style.

you have a PM on this

On a side note see the B3 racing scott foxwell utube vid on selecting the correct right length before you order

I used Trend for the last set I bought.

http://www.oepushrods.com/high-performance/

Steward performance has 3/8 .145 wall for $13.

https://stewardperformance.com/pushrods/

Denny Steward
stewardperformance.com
(386) 957-3879

Anyway, his pushrods have .080" oil holes, which was something I didn't want, so I went through Manton, not .145 wall, but a little over $12 each for 3/8" series 3.

When I bought my Manton pushrods in 2011 they gave me a very good price and they have been top notch in my eng since 2011. Ron

Manton for me as well. Great product and service. They also have a great pushrod checking tool kit. I got 7/16 pushrods. Single taper on the intake and they adjusted their usual taper so I could fit them in my engine for no extra charge.