Moparts

1970 HP 440 Intakes

Posted By: mopar4ya

1970 HP 440 Intakes - 01/29/20 01:29 AM

How many different castings were used for the 1970 440 HP engines? Looking at casting 2951736, mine has no date code on the top showing, just see a 11x11 on the bottom. Is this the date code as in 11 month 11 day? Would be interested in seeing pictures of original intakes on Superbirds as that is what mine is off of. I was looking for a duplicate of mine for a project and didn't realize how many different ones apparently were used.

Thanks!

Attached picture GZDP6400[1].JPG
Posted By: 70gtx440dana

Re: 1970 HP 440 Intakes - 01/29/20 02:54 PM

2951736 is correct. I have seen them with date codes on top side and bottom side. I assume maybe there was more than one supplier. Or, they changed the date code location sometime during the model year. My guess is more than one supplier. Never studied it close enough to know more. There are several listed on Ebay right now if you would like to compare.

Attached picture date code.jpg
Attached picture date code2.jpg
Posted By: RTshaker

Re: 1970 HP 440 Intakes - 01/29/20 02:59 PM

Check the 440source site it did have some casting number info ??http://www.440source.com/intakes.htm
Posted By: mopar4ya

Re: 1970 HP 440 Intakes - 01/30/20 12:16 PM

Thanks, I'll check both places out. Any Superbird guys out there, would like to know what was on your car if it is still a known original.
Posted By: floyd

Re: 1970 HP 440 Intakes - 01/30/20 01:36 PM

Not sure if this will add anything to your quest but here's an NOS manifold I had awhile back.

Attached picture IMG_7068 small.jpg
Attached picture IMG_7069 small.jpg
Attached picture IMG_7070 small.jpg
Attached picture IMG_7071 small.jpg
Posted By: 70gtx440dana

Re: 1970 HP 440 Intakes - 01/30/20 03:11 PM

Originally Posted by mopar4ya
Thanks, I'll check both places out. Any Superbird guys out there, would like to know what was on your car if it is still a known original.



The guys over at Dodgecharger.com ( aero car forum) can likely provide details on the intakes used on Super Birds. I am sure this question has come up before. You might want to
post the question there.
© 2024 Moparts Forums