Posted By: JMCFAN
Drivers side Mirror install? - 01/12/20 07:57 PM
What holds the control to the door...??
Drivers side Mirror install?
Posted By: Alaskan_TA
Re: Drivers side Mirror install? - 01/12/20 08:17 PM
That chrome nut.
But......
You appear to be missing the internal keeper, it prevents the barrel of the remote from passing through the door panel.
But......
You appear to be missing the internal keeper, it prevents the barrel of the remote from passing through the door panel.
Posted By: JMCFAN
Re: Drivers side Mirror install? - 01/12/20 08:31 PM
Originally Posted by Alaskan_TA
That chrome nut.
But......
You appear to be missing the internal keeper, it prevents the barrel of the remote from passing through the door panel.
But......
You appear to be missing the internal keeper, it prevents the barrel of the remote from passing through the door panel.
What I thought... anyone know what it looks like...???
Posted By: Alaskan_TA
Re: Drivers side Mirror install? - 01/12/20 08:32 PM
This is one type - www.ebay.com/itm/Mopar-Remote-Mirro...r-GTX-Cuda-Charger-SuperBee/231831641186
Some years used a steel stamped threaded nut.
Edited to add photo, retainer nut at right;
Some years used a steel stamped threaded nut.
Edited to add photo, retainer nut at right;
Posted By: 440whiteboy
Re: Drivers side Mirror install? - 01/14/20 02:24 PM
one of my cuda cars I had this ( in the picture ) as a retainer nut to hold it in place,
until you used the screw on nut.
However, on another cuda car I had something like a slip on retainer nut like a letter 'U' shape
snap to push on clip.
.jpg "s-l1600 (1).jpg")
until you used the screw on nut.
However, on another cuda car I had something like a slip on retainer nut like a letter 'U' shape
snap to push on clip.