Posted By: calrobb2000
aluminum radiator - 12/15/19 07:30 PM
hi
does anyone make an aluminum radiator for a 1966 belvedere that fits correctly 22"core, big block , clutch fan , with shroud .
all seem to want to sell you one with 1.5 inch bottom outlet , correct size is 1.750 i believe .
thank you !
Posted By: 71birdJ68
Re: aluminum radiator - 12/16/19 12:05 AM
If you have original call Glen Ray radiators, or they can sell you a new one.
Posted By: rhad
Re: aluminum radiator - 12/16/19 03:58 AM
you can get a sleeve to adapt to 1 3/4
Posted By: therocks
Re: aluminum radiator - 12/16/19 11:57 AM
I agree get a sleeve.Mines been on for like 4 years.Cost was 6 bucks or so from Advance.Not a big deal.Got my rad from the Bay for 150 shipped.Cools great. Rocky
Posted By: calrobb2000
Re: aluminum radiator - 12/17/19 04:45 AM
hi
currently have a alu rad with the large 2 core tubes and it is too close to the clutch on the fan app 1/4" .
got a 3 core std size tubes and had almost 1" clearance but fan shroud would not line up and outlet was supose to be 1.75 and was less than 1.5 in ?
some one must make a rad that fits correctly ?