Posted By: vinnyd76
Correct A-Body Leaf Spring Front Hanger Bolt Size? - 12/12/19 04:52 PM
For a 1970 Dart 340, should the rear leaf spring hanger attachment (forward attachment with 4-studs) be 1/2" or 5/8?
Correct A-Body Leaf Spring Front Hanger Bolt Size?
Posted By: AndyF
Re: Correct A-Body Leaf Spring Front Hanger Bolt Size? - 12/12/19 06:27 PM
Should be 5/8 with 340 springs but it could be either. Stuff gets changed after 50 years and who knows if the factory always did what it was supposed to do.
Posted By: kentj340
Re: Correct A-Body Leaf Spring Front Hanger Bolt Size? - 12/13/19 07:18 AM
Factory correct for A, B, C, E bodies with V-8 engines.
Posted By: Mattax
Re: Correct A-Body Leaf Spring Front Hanger Bolt Size? - 12/13/19 07:00 PM
Agree with the aboves.
A good break down of most of the springs/bushing combos.
http://www.stengelbros.com/suspensi.../dodge-lancer-dart-swinger-leaf-springs/
https://www.stengelbros.net/RB-60-Rubber-Bushing-2-OD-%C2%A0-58-ID-25-Length-3125-Overall-Length_p_6861.html
https://www.stengelbros.net/Rubber-Bushings_c_411.html
A good break down of most of the springs/bushing combos.
http://www.stengelbros.com/suspensi...
https://www.stengelbros.net/RB-60-Rubber-Bushing-2-OD-%C2%A0-58-ID-25-Length-3125-Overall-Length_p_6861.html
https:/