Air Cleaner Lid---what does it fit?

Found this in my garage. I think it came from a '73 Fury 440/4bbl police car that I once had. The lid is about 18" diameter. Any idea what else it fits? Thanks for your help.

Just wagging, but I think those lids were common across many different air cleaners, including the 70-71 dual snorkels.

Should fit any 1970 - 74 340 - 360 - 383 - 400 - 440 dual or single snorkel 2 and 4 barrel cars. HP ones were painted orange.

That would also fit later 318 four barrel cars such as '82 thru '89 Diplomat/Gran Fury AHB's (such as my '89 Diplomat pictured), and the E58 360's.

It fits just about every 4bbl car and truck from the mid 70s to the end of the Diplomats in 89 and also 360 2 barrel cars.

...as common as a belly button..


....HP ones only painted orange starting in 1972..

Thanks for the quick replies. Surprising that it fits so many cars.

Not really. Chrysler shared a LOT of parts over various models over various years. It would have cost too much $$$$ to have individual parts for EVERY model for EVERY make.

I used the dash controls for the heat/ac from a '77 Fury (B-body) in a '84 Dodge PU for example. The ONLY difference were the buttons. The B-body pice had black buttons, the truck had chrome buttons. How it bolted in and all other attachments were EXACTLY the same.

This is also why so many 'sellers' attach keywords like 440-6 or HEMI to parts because they know it'll fetch more even though the same part came on Granny's slant 6 Coronet.

Do they all take a pie tin or whatever they are called on the newer year lids?

The lids that take a pie tin are shaped differently in the area around the wing nut.

I have an air cleaner from my old 76 Charger SE.(360 2-barrel) I also have an air cleaner from a 76 Newport.(400 4-barrel lean burn) The 400 lid was bent so I was going to swap it out with the 360 lid.(they are the same diameter) The "lean burn" pie tin does not fit on the 360 lid. It doesn't sit down flush because of how the wing nut area is shaped.

On my 360 AHB with that lid, I've had this pie tin (the 360-4 one) and it fit perfect, but then switched to this sticker as I kind of prefer it now. It's more stock appearing.

Strange I had a lean burn pie tin on my 2bbl 360 lid and it fit the same as it did on the 440 it came from. No difference.