Some people have used them with some success.You may need a for clearance. I have used the hedman shorty headers.You need the small mp starter.Anything else will cost you big bucks.Hooker makes long tube headers for c bodies but they are pricey and hard to find used. Go to www.cbodydrydock.com there is a thread discussing headers for c bodies.
You will have to damage them SO BAD it isn't worth it, ask me how I know! Hooker does make a C-Body Super Comp header, Ceramic Header 5113-1HKR but for the price listed it would be better to get the TTI's. You might be able to make the shorties work on that, but I DAMAGED a pair Hooker B-Body headers putting them on my 71 SportFury...
Dennis at High Speed Welding did these after I went through 2 sets of B-Body headers they are custom 2 1/8 primaries dumping into a 3" exhaust (set up for future engine growth)and can be removed with the engine still bolted to the frame-I should have gotten these made before destroying the other two sets NOT CHEAP but PERFECT!
if you want big performance, the Hooker Super Comps are a good choice. If you just want to upgrade over the stock iron logs, I've been very happy with the Hedman #78070 headers, which are a B body "shorty" header. They fit perfect with no mods, except as noted above they require a mini starter (which I put on all of my cars & trucks anyway)
Posted By: Anonymous
Re: C-body 440 headers - 03/19/0904:46 PM
I was planning on the shorties.Just wasnt sure they fit. Thanx for the part#. I appreciate it!