Posted By: jim6346
1969 Charger Belt Diagram - 04/24/19 01:07 PM
Good Morning Everyone.
Does anyone have a diagram (or pictures) of how all the pulleys run for a 1969 Charger 440 Automatic
with Air Conditioning and Power Steering? I have a 3 groove pulley on the crank and a 2 groove pulley
on the water pump. Is this enough?
Thanks!!
Jim
Posted By: TJP
Re: 1969 Charger Belt Diagram - 04/24/19 11:22 PM
It's in the service manual somewhere, Can't remember which section
The manual is online and down loadable at
MANUAL LINK
Posted By: lemondana
Re: 1969 Charger Belt Diagram - 04/25/19 07:18 AM
With factory AC your bottom pulley should have 4 grooves and your water pump pulley should have only one groove. Sounds to me like somebody cobbled something together there.
Posted By: jim6346
Re: 1969 Charger Belt Diagram - 04/25/19 01:49 PM
Supercuda, you are awesome, thanks!!
Yes, I now have a 4 groove pulley for the crank and a single pulley for the waterpump.
Had to order an idler pulley, was not aware of that.
Thanks!!
Jim
Posted By: Supercuda
Re: 1969 Charger Belt Diagram - 04/25/19 08:05 PM
I might be awesome, though I suspect many would disagree, but TJP hooked you up with the ultimate source, a link to the FSM for yourself.