Moparts
727 pump modification
Posted By:
TrackPack
727 pump modification -
02/12/19
12:15 AM
Looking at converters for a 727 torqueFlite. Some say front pump modification required. What's this modification about?
Posted By:
John_Kunkel
Re: 727 pump modification -
02/12/19
12:36 AM
Here's a pic of the common pump mod, amounts to machining the area around the seal. The sloping cut is done at an angle of 25°.
Posted By:
Cab_Burge
Re: 727 pump modification -
02/12/19
02:46 AM
the problems your bringing up is on mainly 8 inch race converts, maybe it is on some 9 inch also
As John has posted you may need to do some grinding or machining on the pump housing to clear the converter
Posted By:
TrackPack
Re: 727 pump modification -
02/12/19
04:57 AM
I see, clearance for the smaller diameter converters. Thanks guys.
© 2024
Moparts Forums