440 into a 66 Fury..motor mounts?

Our 66 Sport Fury came with a 318 originally. I have a 440 from a 73 New Yorker. What engine mounts will I need for the swap to bolt to the subframe?

IIRC the SB mounts should work.Been a while since Ive done a swap on a C body.I know my 65 B body uses the same BB and SB.Rocky

Think he's asking about the brackets, which aren't the same IIRC.

http://engine-swaps.com/ seems to say the donors are '66-72 B, '70-74 E, '66-73 C-Body B/RB

The engine brackets are different from SB to BB. The rubber mounts appear the same.

The subframe mount stands in the car are the same.

^^^ Ding ding ding I do believe we have a winna.

The mounts and brackets from the 73 c body will work in the 66 they have the same subframe, while you are at it grab the disk brakes, brake booster and prop valve and upgrade the stopping of your Fury

Thanks modelmakerinc...what size rear tires are you running on that Fury?


Nanket, sent you a message. Thanks everybody

They are discontinued BFG drag radials 345-55-15. About 13" of tread, another 4" of side bulge mounted on 12" wheels.

It was mini-tubbed and SS springs inboarded.

One bad looking Fury 65 to 68 were some of the best looking made to me.Rocky

That Fury is extra cool and Bad [censored]! It has a combat ready look.

This is what we are working on. Same owner since the early 80's. We gave $320 for it then added the wheels. Spent the day yesterday at Clay & Sons in Catawissa Mo and got every tittle piece that was missing. Now to get it running and driving again.

pretty neat ride. you are leaving the skirts on [i hope ] ?

"If" 66 K member is the same as 65,the driver side bracket top bolt hole goes to a threaded boss on the front of the block.

65 is different, 66 through 73 are the same subframe, the C-bodies don't have a K-frame.

Like what was said, the engine blocks are like an big block, A body block with a threaded boss on the front of #1 cylinder. And use unique driver side engine mount brackets.

Well, my 66 New Yorker had a 440, you might be able to find some info
there as it was a C body too.

Joe

B/C/Y/E Big block engine mounting brackets

66-72 b body,66-73 c&y body, 70-71 e body(also fit 72-74 when dropping in a big block

65 big block c body uses the 383 abody drivers side wrap around mount...on the drivers side....

passenger side 65 c body big block uses one of the 63-64-65 bbody big block brackets...

1967-1968-1969 383 abody uses the wrap around driver side bracket and the 66 to 72 bbody passenger side bracket on the passenger side!

Thanks Joesixpack...that is very helpfull