Convertible doors - Moparts Forums

Posted By: 1970GTX

Convertible doors - 01/07/19 04:30 AM

How do they differ from hardtop/coupe doors?

Posted By: larry4406

Re: Convertible doors - 01/07/19 01:20 PM

On e-bodies I think only the stamping for the brass wedges.

Posted By: Rhinodart

Re: Convertible doors - 01/07/19 04:19 PM

A-Body's the glass is different and like said above, the brass catches.

Posted By: NANKET

Re: Convertible doors - 01/07/19 06:49 PM

The spring loaded brass piece go on the body of the car in the quarter panel jamb. The door has a plastic wedge held on with 2 screws. The dimples formth screw holes are In every door on B-bodies 66-70.

Posted By: WINGNUT

Re: Convertible doors - 01/07/19 07:59 PM

Even Charger doors have the dimples for the wedges! WINGNUT

Posted By: QuickBpBp

Re: Convertible doors - 01/08/19 01:21 AM

On a 68-70 B-body the vent wing window frame is different...

Posted By: 1970GTX

Re: Convertible doors - 01/08/19 01:31 AM

Thanks for all the input.

So essentially I could swap vent window frames and add the wedges?

Posted By: QuickBpBp

Re: Convertible doors - 01/08/19 01:50 AM

Originally Posted By 1970GTX

Thanks for all the input.

So essentially I could swap vent window frames and add the wedges?

Yes and the glass and the internals. Glass is also convertible only.. Just use the shell and all your old parts.