Fiberglass repair

I need to repair my fiberglass hood. The damaged areas are highlighted. Can I just reapply resin or should I put new matting and resin down? The fibers are loose due to theresin melting in these areas. The damage is only 1 layer deep.

Anyone please. Are my questions that dumb or doesn't anyone know. If you don't know please say so. I'm frustrated enough without this.

If it wer mine i woud grind off th bad area and lay in some mat without using too much resin, lay in several layer to fill in th ground areas
read up on doing this kind to start with

Quote:

---

I need to repair my fiberglass hood. The damaged areas are highlighted. Can I just reapply resin or should I put new matting and resin down? The fibers are loose due to theresin melting in these areas. The damage is only 1 layer deep.

---

You can repair that with JUST resin. It will be a 'cleaner' repair that will less noticable. If the area needs more strength you could add matting, but that will be a more noticable repair.