Moparts

clutch return spring

Posted By: hyefatman

clutch return spring - 09/29/18 05:32 PM

Do I need to install the clutch return spring if I have a diaphragm pressure plate clutch?
Posted By: Pacnorthcuda

Re: clutch return spring - 09/29/18 05:38 PM

The big over center spring? No. The much smaller return spring under the car down by the clutch fork? Yes.
Posted By: therocks

Re: clutch return spring - 09/29/18 05:39 PM

No.Most mfgs recommending removing it.I take it youare asking about the large over center spring.Mines been gone for 20 years with my CF clutch.Just the return spring that is used on the fork is all I have.Rocky
Posted By: John_Kunkel

Re: clutch return spring - 09/29/18 11:48 PM

Posts would be easier to read if folks would just use the

Attached picture Spacebar.jpg
Posted By: hyefatman

Re: clutch return spring - 09/30/18 01:27 AM

thanks
Posted By: Pntastar69

Re: clutch return spring - 09/30/18 03:31 PM

Originally Posted By John_Kunkel
Posts would be easier to read if folks would just use the


Haha, good one John.
Posted By: dem0n72

Re: clutch return spring - 10/01/18 02:24 AM

Mine has been in 18 years with a center force no problems yet.
Posted By: Stanton

Re: clutch return spring - 10/01/18 03:29 PM

Quote:
Mine has been in 18 years with a center force no problems yet.


One day you'll have an epiphany and remove the spring and say "omg, why didn't I listen and remove this thing 18 years ago"

Its not about "problems" !!
© 2024 Moparts Forums